Skip to main content

Hot Rods and Dune Buggies

Los Angeles in the fifties--Jalopies, souped up Model A's. Charlie Ryan first recorded Hot Rod Lincoln in 1955. The Chevrolet Corvette, introduced in limited numbers in 1953, was the first generally available car with a fiberglass body. In LA, hobbyists were making rugged off-road vehicles for desert driving known as dune buggies.

Bob Gurr tests a mockup at Art Center College of Design circa 1950

At the Disney studio in Burbank, machinist Roger Broggie was trying to source a go-kart for kids to drive on a "freeway of the future" for Tomorrowland. In mid-1954, a ride importer delivered a little car made in West Germany on spec. It was painted yellow and green, smelled bad because the two-cycle engine burned oil, and had "Disneyland" painted across the front. A fleet of oil burners didn't sound very attractive, so Broggie contracted with a hot rodder named Johnny Hartman in Montrose, California to develop a welded steel go-kart that needed a body.

In the meantime, a junior accountant in the Disney payroll office threw himself into building a prototype for the little cars of tomorrow. On his own time, Milt Albright spent eight months creating his car. Walt Disney himself test drove it, thanked Milt for his enthusiasm, and didn't use it. He did, however, transfer Milt to Disneyland to handle payroll there. (Milt went on to manage Holidayland and other Disneyland firsts, but that's another story.)

Disneyland was planning to use fiber-reinforced plastic in a big way--boats, castle turrets, Peter Pan vehicles--so it was obvious that Hartman's steel frame go-kart needed a plastic body. Broggie looked for a hip young designer to come up with a futuristic design. Disney special processes wizard Ub Iwerks knew a friend of his sons who might fit the bill.

Robert Henry Gurr was 22, but he had attended Art Center College of Design on a General Motors scholarship, gone to Detroit to design cars for Ford Motor Company for a year, and was now working for industrial designer Channing Wallace Gilson (that's one man, "Gil" to his friends). Gurr was also the published author of How to Draw Cars of Tomorrow. He knew Dave and Don Iwerks through a car club called the Road Burners, but he was actually introduced to Broggie through Art Center.

Gurr worked nights and weekends adapting the design of a Ferrari sports car and the 1954 Porsche 550 Spyder for the scaled-down, two-passenger vehicle. Gurr also had some ideas about the mechanics. For one thing, the car only needed one pedal. Give it gas and the seven and a half horsepower Gladden engine would make it go. Let up on the pedal and the Salisbury centrifugal clutch would make it stop.

Roger Broggie, Bob Gurr (sunglasses), Bill Cottrell, Walt Disney, and Dick Irvine study clay mockup of Gurr's body (January 1955)
Gurr found working on Disneyland exciting and joined WED Enterprises around Christmas 1954. Gurr's model shop instructor at Art Center, Joe Thompson, had his students build Gurr's design, full-size, in chevant clay, just like Detroit. It was a great learning experience for the students, but Thompson worried that publicizing the project would swamp Art Center with requests for free work, so he kept it on the down-low at his home in North Hollywood.

Broggie assumed that a car guy like Gurr knew about engines and differential gears, but Gurr was only trained as a designer.

"I was trained as a car stylist, not as a mechanical engineer," Gurr wrote in 2000. "But all the other guys joining up at the Studio were doing everything Walt wanted. Okay, I better learn fast. So, not only was I doing drawings at night during the week, I spent Saturdays at the Studio drafting car parts, and learning just how much I didn't know. So was everyone else."

Hartman and the ride importer were annoyed to learn that Disney was developing their own car in-house rather than use their services, but Hartman did win a contract to supply steering gears for the fleet. If the importer was Eric Wedemeyer (my suspicion), he was rewarded by selling his West German Strato-Jet ride to the park for the 1956 season.

Broggie signed a contract with fiberglass pioneer Bill Tritt to make forty car bodies at his Glasspar shop in Costa Mesa, about eight miles south of the Disneyland site on Harbor Boulevard. The colorless fiberglass shells went from Glasspar to Hutchinson's Auto Paint in Newport Beach to be painted red, white, blue and other colors.

Dune buggy enthusiasts Ed Martindale and his best friend Ted Mangels started their custom car shop in 1953. Ted would go on to win the Baja 1000 off-road race in 1967. Their company, Mameco, won the contract to assemble and test the cars. Engines, clutches, wheels and tires were bought off the shelf and sent to Mameco in Newport Beach, along with the painted fiberglass bodies, the Hartman steering gears and other components. Each car cost about $1,500--$60,000 for the fleet.

Ed and Ted deliver finished Autopia cars. (Photograph by Old Orange County Courthouse Museum. Used with permission.)
The only thing that the delivered cars were missing was a bumper in case the children accidentally contacted the curb. The highway of the future had tall curbs, so that there was no way that riders could leave the road, and of course they wouldn't deliberately run into the car ahead of them.

Gurr sketched a wrap-around metal bumper and imagined the performance characteristics of spring steel. Instead, he was persuaded by Kaiser Aluminum salesman Mel Tilley (a Disneyland sponsor) to use aluminum for the job.

Gurr himself, along with a crew of new Autopia ride operators, installed the aluminum bumpers on the delivered cars in a circus tent surrounded by furious construction activity, just days before the park opened. The beautiful little cars were ready for opening day and nine of them joined the parade up Main Street to represent Tomorrowland (which had almost no attractions on Preview Sunday).

The horrors of opening day--Black Sunday--are manifold and legendary. The summer heat caused many cars to vapor lock and stall. Some governors, designed to keep the cars below 11 m.p.h., failed, allowing the cars to jump the curb. The young drivers thought they were bumper cars--they had bumpers, didn't they?--and rammed each other with abandon, deforming the aluminum bumpers. The steel steering wheels were not padded, and the frequency of baby teeth getting knocked out earned the Autopia the nickname "Blood Alley" among operators. On camera, even Sammy Davis, Jr. deliberately crashed into Frank Sinatra.

Disney Legend Bob Gurr tests Walt's Police Special--notice the lights--which had no speed governor

Ted Mangels and Ed Martindale of Mameco produce finished Autopia cars in Newport Beach using parts from many sources. (Photo by Old Orange County Courthouse Museum. Used with permission.)

The wrap-around bumpers were needed because there was no center rail to control the cars


  1. Ahhh....the memories of terror and delight of riding those as a kid in the early sixties with my sister and my cousins! =D


Post a Comment

Popular posts from this blog

The Time Nat Winecoff Invented Disneyland

Walt Disney's creative vision and dogged determination made Disneyland a reality. The park embodies his dreams and ideals, but the hard fact is that he needed a lot of help to coax his ideas into tangible reality. Many assume that Walt turned to his world-class staff of artists to develop his park, but they formed the reserves. In fact, Walt formed a cadre of white men mostly in their forties from outside the studio to invent Disneyland.

September 1952 was a pivotal time at the Disney lot, five months before the release of Peter Pan. Walt had built himself a party house farther from the studio, was distracted by his backyard train and other hobbies, and had begun spending weeks at a time in Europe. He returned from his fourth summer in Europe to find that his brother, Roy, had apparently foiled Walt's plan for a Mickey Mouse Park on studio property in Burbank with a whisper campaign among city politicians and money men.

Walt was as restless as his brother Roy was conservative…

Bruce Bushman, Disney Legend

Original imagineer Bruce Bushman has not been recognized by the Walt Disney Company as a "Legend," and that's an omission—he had a tremendous influence on the design of Disneyland.

Bruce was born in New Jersey on April 20, 1911, the son of film star Francis X. Bushman and his first wife, Josephine Fladune. He and his brothers and sisters were raised in Baltimore by their mother. Josephine moved to Santa Monica, California in the late 1920s and Bruce followed around 1931. He attended UCLA and the Chouinard Art Institute and made his living as an artist before joining Walt Disney Productions in the late 1930s.

Bruce was a layout artist on Pinocchio (1940), co-art directed the Nutcracker Suite sequence in Fantasia (1940), and laid out many short cartoons. His first screen credit was on the short First Aiders (1944), and he contributed to the classic short Pigs is Pigs (1954).

Bushman became a sketch artist for the live action film 20,000 Leagues Under the Sea in late 1953, …

Want to Invest in Disneyland? Read this Prospectus.

What's a Disneyland? you ask. It's late September of 1954, and you would be forgiven for not knowing the slightest thing about it. Disney had been approaching General Motors, General Foods, General Mills, General Electric, but that list doesn't include your company.

Television insiders were surprised six months before when Variety and other papers said that Walt Disney had agreed to join dozens of other celebrities to host a television show, but it wouldn't debut until the week of Halloween. At the time, there was mention of a kiddieland, but you ignored that as just ballyhoo for the new variety show. It's show biz, not your biz.

You run a company like Sunnyview Farms, makers of jams, jellies, and sugary candies. Maybe you're Anne Cole, designer of swimwear, or the Bekins brothers, leaders in the moving and storage trade. You could be in charge of advertising for the Pen Corporation of America, or the Shoe Corporation of America, for that matter. Maybe you are …